The veneers named OLD WALL are ceramic wall tiles from our family manufactory RogińskiWarsztatArtystyczny. Tiles are handmade from the high-quality clinker mass. Tiles refer to the appearance of the medieval hand-moulded brick – the Gothic brick.
The OLD WALL veneers are especially suitable for applications in the contemporary building – their deep texture enhances the effect of the traditional “old wall”. The play of the colours of the tiles is similar to the one of our Classic floor tiles. The tile format is approx. 260x70x15 mm (dimensions may vary slightly because of the craftsmanship).
The weight of veneers allows for the construction of the partition walls also in the multi-storey buildings – both new and old ones. Tiles can be installed on the GK/OSB panels, or simply on the original walls of rooms. The assembly on the external elevations is also trouble-free. There are also corners available.
The OLD WALL veneers should not be compared with the tiles produced of the demolition bricks. Compared with the tiles cut from brick, our veneers are of much better quality, which is expressed in parameters such as full frost resistance, hardness, low water absorption and lack of pollution that may occur in old bricks (i.e. mould or algae).
|Nr: Sm_1||26x7x1,5 cm|
|Nr: Sm_2||26x13x1,5 cm Eckstein|
We have a wide knowledge of the materials needed for the proper assembly and subsequent maintenance of the terracotta, brick floors etc. We have been cooperating with the Italian company FILA(www.filasolutions.com) for years, and we have been officially trained in the use of the above mentioned products. After reviewing the details of the contract, such as the number of m2 and the place of application, we will send You the offer with additional funds for the assembly and maintenance of floors and walls made of terracotta and bricks. You can make use of it in whole or in part.
The offer is made in each case individually.